KeysightN5700

class KeysightN5700(

visa_resource: str | VisaConfig,

)

Bases: TDKLambdaGenesys

Keysight N5700-series PSU via the TDK Lambda Genesys SCPI interface.

Attributes

FRIENDLY_NAME

Methods

clear_protection	Clear every latched protection trip on channel.
close	Close the driver's underlying transport.
get_current	Query the measured output current (amperes) on channel.
get_current_setpoint	Query the configured current-limit setpoint (amperes) on channel.
get_operating_mode	Query whether channel is regulating in constant voltage, constant current, unregulated, or off.
get_output_status	Query whether the output on channel is enabled.
get_overcurrent_protection_enabled	Query whether overcurrent protection is enabled on channel.
get_overcurrent_protection_level	Query the overcurrent protection threshold (amperes) on channel.
get_overcurrent_protection_tripped	Query whether overcurrent protection has tripped on channel and not been cleared.
get_overvoltage_protection_delay	Query the overvoltage protection trip delay (seconds) on channel.
get_overvoltage_protection_enabled	Query whether overvoltage protection is enabled on channel.
get_overvoltage_protection_level	Query the overvoltage protection threshold (volts) on channel.
get_overvoltage_protection_tripped	Query whether overvoltage protection has tripped on channel and not been cleared.
get_remote_sense_enabled	Query whether remote sense is enabled on channel.
get_voltage	Query the measured output voltage (volts) on channel.
get_voltage_setpoint	Query the configured voltage setpoint (volts) on channel.
open	Open the driver's underlying transport.
output_enable	Enable or disable the output on channel.
set_current_limit	Set the current limit (amperes) on channel.
set_overcurrent_protection_enabled	Enable or disable overcurrent protection on channel.
set_overcurrent_protection_level	Set the overcurrent protection threshold (amperes) on channel.
set_overvoltage_protection_delay	Set the overvoltage protection trip delay (seconds) on channel.
set_overvoltage_protection_enabled	Enable or disable overvoltage protection on channel.
set_overvoltage_protection_level	Set the overvoltage protection threshold (volts) on channel.
set_remote_sense_enabled	Enable or disable remote sense on channel.
set_voltage	Set the output voltage (volts) on channel.

FRIENDLY_NAME = 'Keysight N5700-series PSU using the TDK Lambda Genesys SCPI interface'

clear_protection(channel: int) → None

Clear every latched protection trip on channel. The output stays off until re-enabled.

close() → None

Close the driver’s underlying transport.

get_current(channel: int) → float

Query the measured output current (amperes) on channel. Output may vary from current-limit setpoint outside of constant current mode.

get_current_setpoint(channel: int) → float

Query the configured current-limit setpoint (amperes) on channel. Output may vary from actual measured current outside of constant current mode.

get_operating_mode(

channel: int,

) → OperatingMode

Query whether channel is regulating in constant voltage, constant current, unregulated, or off.

get_output_status(channel: int) → bool

Query whether the output on channel is enabled.

get_overcurrent_protection_enabled(channel: int) → bool

Query whether overcurrent protection is enabled on channel.

get_overcurrent_protection_level(channel: int) → float

Query the overcurrent protection threshold (amperes) on channel.

get_overcurrent_protection_tripped(channel: int) → bool

Query whether overcurrent protection has tripped on channel and not been cleared.

get_overvoltage_protection_delay(channel: int) → float

Query the overvoltage protection trip delay (seconds) on channel.

get_overvoltage_protection_enabled(channel: int) → bool

Query whether overvoltage protection is enabled on channel.

get_overvoltage_protection_level(channel: int) → float

Query the overvoltage protection threshold (volts) on channel.

get_overvoltage_protection_tripped(channel: int) → bool

Query whether overvoltage protection has tripped on channel and not been cleared.

get_remote_sense_enabled(channel: int) → bool

Query whether remote sense is enabled on channel.

get_voltage(channel: int) → float

Query the measured output voltage (volts) on channel. Output may vary from voltage setpoint outside of constant voltage mode.

get_voltage_setpoint(channel: int) → float

Query the configured voltage setpoint (volts) on channel. Output may vary from actual measured voltage outside of constant voltage mode.

open() → None

Open the driver’s underlying transport.

output_enable(enable: bool, channel: int) → None

Enable or disable the output on channel.

set_current_limit(

current_limit: float,

channel: int,

) → None

Set the current limit (amperes) on channel.

set_overcurrent_protection_enabled(

enabled: bool,

channel: int,

) → None

Enable or disable overcurrent protection on channel.

set_overcurrent_protection_level(

current: float,

channel: int,

) → None

Set the overcurrent protection threshold (amperes) on channel.

set_overvoltage_protection_delay(

delay: float,

channel: int,

) → None

Set the overvoltage protection trip delay (seconds) on channel.

set_overvoltage_protection_enabled(

enabled: bool,

channel: int,

) → None

Enable or disable overvoltage protection on channel.

set_overvoltage_protection_level(

voltage: float,

channel: int,

) → None

Set the overvoltage protection threshold (volts) on channel.

set_remote_sense_enabled(

enabled: bool,

channel: int,

) → None

Enable or disable remote sense on channel.

set_voltage(voltage: float, channel: int) → None

Set the output voltage (volts) on channel.