Keysight34980A

class Keysight34980A(

visa_resource: str | VisaConfig,

*,

sync_system_clock: bool = True,

)

Bases: DAQDriverBase

Keysight 34980A Multifunction Switch/Measure Unit.

Initialize the driver.

Parameters:

• visa_resource – VISA resource string or full VisaConfig.

• sync_system_clock – Sync the instrument clock to host UTC on open() so returned timestamps align with the host. Enabled by default.

Attributes

ai_channels	Frozen snapshot of configured AI channels, keyed by alias.
ai_hw_timing_config
ao_channels	Frozen snapshot of configured AO channels, keyed by alias.
ao_hw_timing_config
channels	Frozen snapshot of all configured AI/AO/DI/DO channels (excludes relays).
di_channels	Frozen snapshot of configured DI channels, keyed by alias.
di_hw_timing_config
do_channels	Frozen snapshot of configured DO channels, keyed by alias.
do_hw_timing_config
relay_channels	Frozen snapshot of configured relay channels, keyed by alias.
points_in_buffer

Methods

close	Close every task/handle owned by the driver.
close_relay	ROUTe:CLOSe the relay.
configure_ai_channel	Deprecated: use configure_ai_voltage_channel.
configure_ai_current_channel	Register an AI current channel.
configure_ai_hw_timing	Configure TRIG:SOUR TIMER at the configured sample period and infinite count.
configure_ai_thermocouple_channel	Register an AI thermocouple channel.
configure_ai_voltage_channel	Configure an AI voltage channel: CONF:VOLT:DC at computed range, then add to ROUT:SCAN and enable timestamps.
configure_ao_channel	Deprecated: implement configure_ao_voltage_channel instead.
configure_ao_current_channel	Register an AO current channel.
configure_ao_voltage_channel	Register an AO voltage channel.
configure_di_line_channel	Parse MNNN/B (slot/channel/bit), program the port for DI, and register the line.
configure_di_port_channel	Parse MNNN (slot/channel), program the port for DI, and register the port.
configure_do_line_channel	Parse MNNN/B (slot/channel/bit), program the port for DO, and register the line.
configure_do_port_channel	Parse MNNN (slot/channel), program the port for DO, and register the port.
define_relay_channel	Build a RelayChannel for physical_channel (e.g. "3101" = slot 3 / channel 101).
fetch_analog	Block until the buffer holds at least one full per-channel batch, then drain a channel-aligned chunk.
get_actual_sample_rate	Actual hardware sample rate achieved after start().
open	Open the underlying transport (or verify the device is present, for handle-less SDKs).
open_relay	ROUTe:OPEN the relay.
read_analog	Software-timed read of every configured AI channel.
read_digital_line	Sample a single DI line.
read_digital_port	Sample a DI port as one N-bit integer.
start	Enable timestamps and INIT the scan.
stop	ABORt any pending scan.
write_analog_value	Write value to AO channel.
write_digital_line	Drive a single DO line.
write_digital_port	Drive a DO port as one N-bit integer.